Inter-provenance variability and phenotypic plasticity of wood and leaf traits related to hydraulic safety and efficiency in seven European beech ( Fagus sylvatica L.) provenances differing in yield

Key message Seven European beech provenances differing largely in growth performance were grown at two common garden sites in Germany and Slovakia. The intra-specific variability of most traits was explained more by phenotypic plasticity than inter-provenance variability, and efficiency-related traits showed a higher phenotypic plasticity than safety-related traits. Context To maintain climate-resilient future forests, replicated common-garden experiments are suited for developing assisted migration strategies for key tree species. Aims We analysed the magnitude of inter-provenance variability and phenotypic plasticity for 12 functional traits of European beech ( Fagus sylvatica L.) and analysed whether the climate at the place


Introduction
European beech (Fagus sylvatica L.) is a crucial broadleaf tree species in Europe, playing significant roles in both ecological and economic domains (Antonucci et al. 2021).Nevertheless, recent changes in precipitation patterns and increasing frequency of heat waves have resulted in reduced production and stability as well as in elevated drought-induced mortality rates of beech stands (Krupková et al. 2019;Schuldt et al. 2020;Schmied et al. 2023).To mitigate the negative impacts of climate change, the use of assisted migration, which involves artificial transfer of seeds or seedlings, has been proposed as a possible adaptive strategy (Williams & Dumroese 2013;Bolte et al. 2023).Assisted gene flow is a subcategory of assisted migration defined by the movement of genetic material between different populations or provenances.This process aims to enhance the genetic diversity and adaptive potential of tree populations in response to environmental challenges, without species replacement.
To assess the benefits and potential risks associated with this measure, common garden experiments have been established across Europe (Liesebach 2015;Robson et al. 2018).The implementation of common garden designs is crucial for evaluating changes attributable to the genetic composition of tree provenances (Robakowski et al. 2022;Balekoglu et al. 2023;Park & Rodgers 2023).Furthermore, evaluating multiple plots with different environmental conditions can provide insights into the short-term acclimation potential (phenotypic plasticity within provenance) of a population to new conditions.
Intraspecific variability allows for the existence of diverse traits among different populations or genotypes of European beech (González de Andrés et al. 2021).This variability can encompass variation at the wood level, i.e. wood anatomical features, embolism vulnerability and hydraulic efficiency, or at the leaf level, i.e. leaf morphology and leaf physiological responses such as carbon and nitrogen isotopic compositions, which all might be interconnected with growth-related patterns.This diversity serves as a reservoir of potential adaptive traits that may confer advantages under altered climatic conditions.A high degree of phenotypic plasticity-the ability of populations to exhibit different phenotypes in response to environmental cues-allows European beech to adjust its physiological, morphological and biochemical traits in the face of changing environmental stressors (Frank et al. 2017).For instance, the plasticity in xylem vulnerability to embolism or water use efficiency could enable some individuals or populations to better withstand drought or heat stress, essential qualities in times of a rapidly changing climate including increases in frequency and intensity of such stressors (Cavallaro et al. 2023;Rowland et al. 2023).As climate change continues to alter environmental conditions unpredictably, the adaptive potential within a species becomes crucial for its persistence (Bussotti et al. 2015).The ability of European beech to exhibit phenotypic plasticity in traits related to water use, growth and resistance to drought-induced embolism allows for higher survival rates as it can potentially acclimate to new climatic regimes or geographical areas (Gárate-Escamilla et al. 2019).By identifying populations or genotypes with superior adaptive potential, conservation efforts can prioritize these variants for maintaining genetic diversity or selectively introducing them into vulnerable or newly established ecosystems, thus aiding in the species' survival and adaptation.
Drought is a major limiting factor of photosynthesis, growth and survival of European beech (Leuschner et al. 2023).Hydraulic failure due to embolism formation occurring during frost exposure (Charra-Vaskou et al. 2023) and under low water potential during drought periods (Arend et al. 2021;Blackman et al. 2023) is one of the main factors behind tree mortality.The water potential at which plants lose 50% (P 50 ) or 88% (P 88 ) of their hydraulic conductance is a key trait describing drought tolerance in trees (Brodribb and Cochard 2009;Petek-Petrik et al. 2023).Embolism formation in xylem vessels commences a cascade of physiological responses that ultimately lead to tissue mortality (Mantova et al. 2023).While some tree species to a certain degree might be able to repair the damaged tissue (Knüver et al. 2022), this could not be confirmed for European beech after the severe 2018/2019 drought in Central Europe (Arend et al. 2022), highlighting the importance of an embolism-resistant xylem for withstanding drought.
The P 50 of European beech can be affected by interactions of provenance (genotypic variability) and site (phenotypic plasticity) (cf., Wortemann et al. 2011).Hence, selection of populations with more negative P 50 can be useful for assisted migration efforts toward greater drought stress resistance as long as this does not tradeoff with yield.Such differences in P 50 are caused by morphological adjustments at the xylem ultra-structure level (Isasa et al. 2023), which might likewise affect hydraulic efficiency and thus tree growth (e.g.Hajek et al. 2014Hajek et al. , 2016)).While the diameter of the water-conducting vessels commonly is associated with xylem safety across species, this often-described pattern disappears at the intra-specific level (Isasa et al. 2023).Here, the total number of pits and thus the total vessel wall area seem more influential, which is mirrored by the lumen-to-sapwood area ratio among other traits (Lübbe et al. 2022;Avila et al. 2023;Waite et al. 2023).This wood anatomical variable refers to the total area occupied by vessel per crosssectional xylem area, where a higher lumen-to-sapwood area ratio indicates either the presence of wider and/or more vessel per cross-sectional xylem area.In European beech, however, two studies observed limited variability in P 50 across provenances (Wortemann et al. 2011;Hajek et al. 2016), indicating that this safety-related trait might be quite static.
Specific conductivity (K s ) influences a tree's ability to transfer water and nutrients from the roots to the leaves, which are critical for various physiological processes essential for growth and productivity.Adequate water supply due to an efficient water-conducting system supports increased photosynthetic rates, which, in turn, provide the necessary resources for growth, including carbohydrates for structural development and energy.Consequently, different descriptors of hydraulic efficiency at either stem and/or branch level are commonly positively correlated with tree growth, both at the intra-specific (Hajek et al. 2014(Hajek et al. , 2016;;Ramesha et al. 2022) and inter-specific (Hoeber et al. 2014;Kotowska et al. 2015;Kumar et al. 2022) levels.Hence, enhanced growth often demands larger, more efficient conduits for water transport, which facilitates increased nutrient uptake and biomass production.Moreover, tree-level hydraulic conductance is affected not only by vessel size, but also by total sapwood area involved in water transport (Kotowska et al. 2021;Pappas et al. 2022).Because xylem safety is strongly related to the thickness of intervessel pit membranes (Li et al. 2016;Isasa et al. 2023) while vessel diameter seems not to trade-off with xylem safety at the intra-specific level for beech (Hajek et al. 2016;Schuldt et al. 2016;Isasa et al. 2023), it might be possible to identify genotypes with high yield and high xylem safety.The lacking trade-off between P 50 and growth at the intra-specific level (e.g.Cochard et al. 2007;Fichot et al. 2009;Hajek et al. 2014Hajek et al. , 2016) ) highlights the potential of this important drought-tolerance trait (e.g.Blackmann et al. 2023) for selecting suitable provenances for assisted migration efforts.
Another key trait for identifying provenances that are potentially better drought-adapted is water use efficiency (WUE), i.e. the amount of carbon gained per unit of water loss.An efficient use of water enables trees to maintain physiological functioning and sustain growth and survival during periods of water scarcity (Olano et al. 2023).Therefore, WUE is a crucial characteristic of forest ecosystems (Petrík et al. 2023).This is confirmed by studies reporting a negative relationship between tree growth and intrinsic water use efficiency (iWUE), i.e. the ratio of net photosynthetic assimilation to stomatal conductance (Wang et al. 2013;Dixit et al. 2022;Johnson and Brodribb 2023).Using leaf 13 C isotopes (δ 13 C) as a proxy of iWUE is particularly advantageous as it captures the long-term carbon-water balance of plants (Condon et al. 2004;Frank et al. 2015;Brendel 2021;Rabarijaona et al. 2022).
The efficiency of photosynthesis and the water content in plant tissues are significantly linked to N availability.A higher leaf N concentration can potentially counterbalance the adverse effects of water scarcity and increased evaporative demand, enabling trees to maintain high WUE (Song et al. 2019).Higher soil N availability is often reflected in a lower foliar C:N ratio (Sardans et al. 2012;Sheng et al. 2021), while a lower foliar nitrogen isotopic composition (δ 15 N) can be indicative for a rich mycorrhizal fungal network (Hobbie & Högberg 2012;Clemmensen et al. 2021).
We selected seven European beech (Fagus sylvatica L.) provenances differing in growth performance from two common garden sites in Slovakia and Germany differing in climatic and edaphic conditions.The provenances originate from the Pyrenees in Spain up to the Carpathian Mountains in Slovakia, covering a steep climatic gradient at their places of origin.We investigated two growth-related and ten functional wood and leaf traits of which most are related to hydraulic safety and efficiency (Table 1) in order to quantify the magnitude of interprovenance and/or phenotypic plasticity.Here, we consider the specific hydraulic conductivity, average vessel diameter, vessel density and the lumen-to-sapwood area ratio as traits related to hydraulic efficiency while the xylem pressures at 50% and 88% loss of hydraulic conductivity and the carbon isotope signature are considered as traits related to hydraulic safety.We tested whether (i) traits related to hydraulic safety display less variability (inter-provenance variability and/or phenotypic plasticity) than traits related to hydraulic efficiency, while (ii) yield is unrelated to hydraulic safety.

Plant material, experimental sites and field conditions
Provenance seeds of European beech (Fagus sylvatica L.) were collected from 100 natural populations across Europe, the seeds grown in a nursery, and 2-year-old seedlings were distributed to common garden sites within a Europewide provenance experiment (von Wühlisch et al. 1998;Liesebach 2015).Two common garden sites established in 1995 were used for this study (Fig. 1a).The German site is located near Kiel (54° 18′ N, 10° 16′ E, 40 m a.s.l.), while the Slovakian site is situated near Hriňová (48° 31′ N, 19° 34′ E, 840 m a.s.l.).The German site was previously used as agricultural land, and the Slovakian site was afforested from 1970 onwards, mostly with Norway spruce.The climatic data for comparison of the provenances and common garden sites were derived from the WorldClim database (Fick and Hijmans 2017).The reference period for the climate at origin of the provenances was 1950-2000, as it characterizes the period of seed collection and the conditions under which the parent trees developed before their seeds were transferred to the common garden sites (Sáenz-Romero et al. 2019).The comparison period for the common garden sites is 2000-2017, the interval during which the trees grew and were sampled.We used two aridity metrics, the Ellenberg quotient (EQ; Ellenberg 1988) and the Forest Aridity Index (FAI; Gavrilov et al. 2019), to compare the two sites where T w represents the temperature of the warmest month (°C) and MAP represents the total sum of annual precipitation (mm), and where T 7-8 represents mean temperature from July to August (°C), P 5-7 represents the precipitation sum from May to July (mm) and P 7-8 represents the precipitation sum from July to August (mm).
Even though the North German site has a more oceanic climate and the Slovakian site is more continental, the relatively high altitude of the Slovakian site leads to similar precipitation patterns.This is reflected also in very similar values of EQ and FAI between the common garden sites.However, winter temperature is lower in the Slovak plot and early frost risk is higher in the Slovakian site (Table 2).The two sampling campaigns (leaf and branch samples) were conducted in August of 2014 at the German site and in August of 2017 at the Slovakian site.The vegetation seasons of sampling years were similar in regard to average air temperature and precipitation patterns (Fig. 1e, f ).Provenances were planted under a randomised block design, with three blocks at the German site and two blocks at the Slovakian site.The set of seven provenances occurring in both sites was selected to cover a broad climatic gradient at the place of origin (Fig. 1).Thus, we selected provenances from different geographic regions and climates throughout Europe with a wide range of mean annual temperature (6-15.3°C) and mean annual precipitation (575-1050 mm).The geographic and climatic data of both common garden sites and provenances are presented in Table 2.
At the German site near Kiel, the soil type varies from loamy sand to sandy loam with good nutrient availability that does not limit tree growth (Müller 2012).At the Slovakian site, soil is a mesotrophic Eutric Cambisol, a sandy loam on granodiorite parent rock (Šály et al. 2011).In addition, soil samples from both sites were collected in 2022 from the 0-30-cm layer using a Puerckhauer sampler.A composite sample from three positions in each subplot (for each provenance and block separately) was used for the analysis.The samples were sent to the laboratory of the Department of Plant Ecology and Ecosystem Research at the University of Göttingen, Germany, for analysis of soil N and organic C (Fig. 1b-d).Soil samples were oven-dried at 70 °C for 48 h and soil C and N concentrations quantified by gas chromatography (Vario EL III; Elementar, Hanau, Germany).The soil organic matter content was determined by the dry ignition method at 600 °C.

Huber value, leaf carbon and nitrogen analysis
The leaves from 9 to 12 branches from each branch were removed from the basipetal segment upwards to determine cumulative leaf area (A L , m 2 ) using a flatbed scanner and the WinFOLIA software (Régent Instruments, Quebec, Canada).The branch-level Huber value, i.e. sapwood-to-leaf area ratio (A S :A L , 10 −4 m 2 m −2 ), was calculated by dividing the maximal sapwood area of the branch by A L .
Leaves for the measurement of carbon and nitrogen concentration and isotope partitioning were sampled in August 2014 and August 2017 from the German and Slovakian site, respectively.The leaves were sampled from upper-canopy branches of at least ten random trees per provenance with a long-reaching pruner.Both samplings were conducted during summer to obtain fully mature leaves.In total, leave samples of 145 individuals were analysed at the Centre for Stable Isotope Research and Analysis (KOSI), University of Göttingen.C and N concentrations as well as carbon and nitrogen isotopic signatures (δ 13 C and δ 15 N, respectively) were measured with a Delta Plus isotope mass ratio spectrometer (Finnigan MAT, Bremen, Germany), a ConFlo III interface (Thermo Electron Corporation, Bremen, Germany) and a NA2500 elemental analyser (CE Instruments, Rodano, Milan, Italy) using standard δ notion: δ = (R sample / R stand- ard − 1) × 1000 (‰).

Xylem anatomy
Branches for the xylem anatomy measurements were sampled from the sun-exposed upper part of the crown in 2014 and 2017 from the German and Slovakian site, respectively (the same branches used for leaf sampling).Anatomical parameters were assessed on 9-12-branch segments per provenance from the basal end of the branches used for hydraulic measurements.Although the samples from the German site were collected and analysed in August 2014 and those from the Slovakian site in August 2017, branch age of the analysed segments was comparable (2.81 ± 0.07 years, mean ± SE, n = 148).The segments were stored in ethanol (70%) until further processing.Transverse sections of 10-20 µm width were then cut with a sliding microtome (G.S.L.1; Schenkung Dapples, Zürich, Switzerland), stained with a safranin solution (1 in 50% ethanol; Merck, Darmstadt, Germany) and embedded in Euparal medium.Microscopic images of the cross-sections were obtained with a stereo-microscope with an automatic stage (SteREO V20; Carl Zeiss Micro-Imaging GmbH, Jena, Germany) using the AxioVision v4.8.2 software (Carl Zeiss MicroImaging GmbH, Jena, Germany) to digitalise the complete cross-section.Images were analysed using Adobe Photoshop CS2 (version 9.0; Adobe Systems Incorporated, USA) and the particle analysis function of ImageJ (Schneider et al. 2012).The complete xylem cross-section without pith and bark was used for all subsequent calculations.The parameters were calculated as follows: idealised vessel diameter (D, µm), as obtained from major (a) and minor (b) vessel radii as D = (32 × (a × b) 3 / (a 2 + b 2 )) ¼ , and vessel density (VD, n mm −2 ) (Lewis and Boose 1995).The lumen-to-sapwood area ratio (A L :A X , %) was derived by dividing the cumulative vessel lumen area by the corresponding sapwood area.While distance to the branch tip is known to be highly influential for measurements of wood anatomical traits (Lechthaler et al. 2019;Soriano et al. 2020), no measurements are available for the present dataset.To overcome this shortcoming and to test for differences in distance to tip between sites and provenances, we modelled it based on the branch diameter-branch length scaling (cf.Weithmann et al. 2022a, b).According to this analysis, the analysed samples did not differ systematically in distance-to-tip between provenances and/or sites.For the complete analysis of a modelled distance-to-tip effect, please refer to the data repository (Kurjak et al. 2024).

Hydraulic conductivity
The hydraulic conductivity of ten branch segments per provenance was measured using the Xyl'em apparatus (Bronkhorst, Montigny-les-Cormeilles, France) on branch segments with an average length of 294.4 ± 0.9 mm (mean ± SE, n = 148).In the laboratory, all lateral branches were removed, and the resulting scars were sealed using quick-drying superglue (Loctite 431; Henkel, Düsseldorf, Germany) suitable for wet surfaces.To determine the maximum hydraulic conductivity (K h , kg m −1 MPa −1 s −1 ) at 6 kPa, demineralized and degassed water containing 10 mM KCl and 1 mM CaCO 3 was used.Prior to the measurements, three 10-min flushes at 120 kPa were conducted to ensure the removal of any potential emboli.The diameter of each segment was measured at both the basipetal and distal ends, as well as at four positions along the segment.The sapwood area without pith and bark for a given beech branch segment diameter was then calculated using the regression coefficients from Schuldt et al. (2016) as A xylem = − 3.715 + 0.770A cross .Subsequently, the branch-level, empirically specific conductivity (K s , kg m −1 MPa −1 s −1 ) was determined by dividing K h by the maximum basipetal sapwood area (cf.Schuldt et al. 2016;Hajek et al. 2016).

Vulnerability to embolism
Vulnerability to xylem cavitation was measured on 9-12 branch samples (replicated trees) per provenance and site (137 samples in total), using the Cavitron technique (Cochard et al. 2005) ) is the slope of the curve at the inflexion point.The water potential at 88% loss of conductivity (P 88 ) was computed from the equation by substituting the corresponding PLC quantile and solving for P. The provenance average PLC curves for each common garden site are plotted in Figure 6 in Appendix.

Dendrometric measurements
The aboveground growth performance of the respective provenances within the two common gardens was evaluated based on diameter at breast height (DBH, cm) and tree height (H, m), measured with a forestry calliper and a Vertex III device (Haglöf, Inc., Sweden), respectively.The measurements were conducted after the vegetation seasons 2014 (German site) and 2016 (Slovakian site).Aboveground biomass was estimated from an empirical equation given by Wutzler et al. (2008) as aboveground biomass (AGB) = 0.00523 × DB H 2.12 × H 0.655 .To make data of the two sites comparable, we divided the measured values of H and AGB by the number of vegetation seasons from establishment of the trials to measurements to obtain annual increments, height increment (H inc ) and aboveground biomass increment (AGB inc ).

Phenotypic plasticity
The phenotypic plasticity for each provenance and trait was calculated from the median differences between the two sites.As most of the traits were not normally distributed (Valladares et al. 2006), we computed the plasticity index, based on maximum and minimum medians (PI md ), as follows: where x max is the maximum median (provenance median from site with higher median) and x min the minimum median (provenance median from site with lower median.Values of PI md closer to 0 represent limited phenotypic plasticity, and values close to 1 represent high phenotypic plasticity.

Statistical analysis
All statistical analyses were conducted in the R statistical software v4.2.0 (R Core Team 2022).After excluding individuals with missing values, the total sample size is 145 individuals for all traits, 69 individuals from the German site and 76 from the Slovakian site.The homogeneity of variance between populations was first analysed by Bartlett's test.Then, the normal distribution of each trait was tested by the Shapiro-Wilk test.All traits except P 50 , P 88 , δ 13 C and D were not normally distributed and were further log-transformed for the ANOVA.A three-way ANOVA was used with provenances, common garden sites and blocks as factors with fixed effects.Moreover, differences between provenances were tested separately for each plot by Tukey's HSD post hoc test.Pearson correlation analysis was used to test for inter-relationships between traits based on data pooled across all provenances and both sites, with the corrmorant R package (Link 2020).The significance of Pearson correlations was tested via cor.testfunction in R. Finally, principal component analysis on scaled and centred data was applied with factoextra library (Kassambara and Mundt 2020) to explore the overall relationship between the traits and examine the site and provenance clustering within this system.

Overall variability across provenances and sites
All tested traits showed significant differences between the two common garden sites (Table 3).Likewise, provenance had a significant impact on 9 of the 12 growth-related, wood and foliar traits, indicative for a high degree of inter-provenance variability; only vessel diameter (D), water potential at 50% loss of hydraulic conductance (P 50 ) and carbon isotope signature (δ 13 C) did not differ across provenances according to the three-way ANOVA (Table 3).On the other hand, block as a fixed factor did not influence any of the tested traits.The interaction of provenance and site significantly impacted all growth-related traits, the foliar nitrogen isotope ratio (δ 15 N) and D (Table 3), indicating that provenances differed in their response to the different environments.The partitioning of sums of squares from the ANOVA analysis showed a strong effect of site on the variability of leaf δ 13 C, δ 15 N, the carbon-to-nitrogen ratio (C:N) and VD.Provenance had a high contribution to the variance in the increment of the DBH (DBH inc ) and AGB inc compared to the other traits.The Provenance-Site interaction had the largest influence on H inc (Fig. 2a).The results of the pairwise comparison between the provenances for all traits are given in Tables 4 and 5 in Appendix.

Growth performance
At the time of sampling, trees at the German site had reached an average AGB between 19.5 kg for the Slovenian (SL) provenance and 75.4 kg for the Slovakian (SK) provenance at an age of 19 years; i.e. growth performance almost differed by a factor of 4 across provenances.At the Slovakian site, a comparable AGB was observed, ranging between 28.0 kg for the SL provenance and 63.8 kg for the SK provenance, although the trees were 3 years older at the time of sampling (Table 4 in Appendix).As a consequence, AGB inc on average was 15% lower at the Slovakian site compared to the German site (1.72 kg year −1 versus 2.04 kg year −1 , respectively).Consequently, all studied growth rates differed significantly between sites and provenances, with significant provenance-specific differences in the site effect.Especially, the SL provenance showed lower DBH inc and AGB inc compared to other provenances at both sites, while the SK provenance showed exceptionally high growth rates (Table 4 in Appendix and Fig. 2a, b).

Embolism vulnerability and hydraulic efficiency
Even though the ANOVA results showed significant site differences in the water potential at 50% loss of hydraulic conductance (P 50 ; Table 3), the absolute difference between the mean P 50 for the German (mean ± SE, − 2.99 ± 0.04 MPa) and Slovakian (mean ± SE, − 2.86 ± 0.03 MPa) sites was only 0.13 MPa (Table 5 in Appendix and Fig. 3a).At provenance level, the most remarkable difference between sites was observed for the Czech (CZ) provenance, with a difference of 0.43 MPa.The CZ provenance showed greater vulnerability to xylem embolism at the Slovakian site.The variability observed for P 88 followed the patterns of P 50 , with the exception of SL provenance, which differed significantly by 0.45 MPa between sites while no difference was detected in P 50 (Fig. 3b).
While vulnerability to cavitation was comparable across sites, specific conductivity (K s ) was on average higher at the German site (3.76 ± 0.16 kg m −1 MPa −1 s −1 ) than at the Slovakian site (2.64 ± 0.11 kg m −1 MPa −1 s −1 ).There were also significant site differences within provenances, with a greater K s value at the German site for all provenances except the Spanish (ES) and CZ provenances (Fig. 3f ).The significant differences between sites for K s were primarily driven by the CZ provenance, similar to P 50 (Fig. 3f ).
Moreover, provenances from the German site had significantly lower VD in their branch wood with greater vessel diameters (D) and lumen-to-sapwood area ratios (A L :A X ; Fig. 3c-e) although the branches were on average 1 year younger at the German site at the time of sampling (mean branch age ± SE, 2.3 ± 0.1 years) compared to the Slovakian site (3.3 ± 0.1 years).VD differed significantly between sites for all provenances, and D differed significantly between sites for all provenances except SK, SL and CZ provenances.
PV, Site, PV × Site and block are evaluated as fixed factors df is degrees of freedom, SumSQ is the sum of the squares, MeanSQ is the mean square, F is the F-statistic, p is the significance, DBH inc is the diameter at breast height increment, H inc is the tree height increment, AGB inc is the aboveground biomass increment, δ 13 C is the carbon isotope ratio, δ 15 N is the nitrogen isotope ratio, C:N is the carbon-to-nitrogen ratio, P 50 is the water potential at 50% loss of hydraulic conductance, P 88 is the water potential at 88% loss of hydraulic conductance, A L :A X is the lumen-to-sapwood area ratio, D is the vessel diameter, VD is the vessel density, K s is the specific conductivity

Foliar chemistry
The trees growing at the German site showed significantly lower δ 13 C values, higher δ 15 N values and a higher C:N ratio of their leaves (Fig. 2d-f ).The leaf δ 15 N and C:N differed between the sites for all provenances, but the leaf δ 13 C differed between sites only for the ES provenance, the two German provenances (DE1, DE2) and the SL provenance.

Trait relatedness to the climate at origin and phenotypic plasticity index
The phenotypic plasticity index based on medians (PI md ) differed between traits and provenances (Fig. 4a, b).The phenotypic plasticity of the safety-related hydraulic traits, i.e.P 50 , P 88 and δ 13 C, was significantly lower across provenances than that of traits that could be related to hydraulic efficiency, foremost K s and VD; a high phenotypic plasticity was likewise observed for the foliar chemistry traits (δ 15 N and C:N).The provenances from more arid environments (higher EQ, lower MAP/mean season precipitation (MSP)) showed lower PI md for P 50 , P 88 , A L :A X and δ 13 C but higher PI md of leaf C:N according to the correlation analysis (Fig. 4c).Moreover, mean annual temperature (MAT) of provenances' place of origin correlated positively with PI md of H inc and negatively with PI md of A L :A X ; i.e. provenance originating from a more arid environment developed a xylem with lower lumento-sapwood area ratios at the German and Slovakian site.
Fig. 2 Trait distribution between provenances and common garden sites for tree growth-related variables and leaf nutrient status.Given are the tree height increment (a, H inc ), aboveground biomass increment (b, AGB inc ), sapwood-to-leaf area ratio (c, A S :A L ), leaf carbon isotope ratio (d, δ 13 C), leaf nitrogen isotope ratio (e, δ. 15 N) and the foliar carbon-to-nitrogen ratio (f, C:N).Frequency distributions are supplemented with the provenance average (dots) and 95% confidence intervals.The provenances are sorted from the wettest origin (CZ) to driest origin (ES) based on Forest Aridity Index.Results of the post hoc tests are given in Table 4 in Appendix

Interrelationships between growth-related, wood and foliar traits
Across sites, no dependency of growth-related traits with any foliar or hydraulic trait was observed according to the Pearson correlation matrix (Fig. 5).Within sites, however, provenances displaying a high vessel density in their branch wood reached highest growth rates, though again, no trade-off between yield and xylem safety was observed (Figure 7 in Appendix).Across sites, xylem safety (i.e.P 50 ) and hydraulic efficiency (i.e.K s ) were both strongly related with the lumen-to-sapwood area ratio (A L :A X ) and vessel density, two traits that are likewise associated with the total vessel wall area per cross-section.δ 13 C as a proxy for intrinsic water use efficiency was negatively correlated with D and K s and positively correlated with VD (Fig. 5).Moreover, δ 15 N showed a strong positive correlation with C:N and K s and a strong negative correlation with VD, A L :A X and P 50 .The C:N ratio showed a strong positive correlation with D and K s .

Growth performance across provenances and sites
For European beech, a reduction in water availability, winter temperature, late frost exposure as well as growing season length might result in reduced growth  5 in Appendix rates (Vitasse et al. 2009;Kreyling et al. 2012;Hofmann et al. 2015;Nord-Larsen & Pretzsch 2017).Here, lower temperatures as well as more frequent and severe frost exposure at the Slovakian site most likely resulted in reduced growth rates by on average 15% despite a more favourable soil nitrogen supply.At both sites, however, the same provenance showed the lowest (Slovenian provenance) and highest (Slovakian provenance) aboveground biomass increment (AGB inc ).These two extreme provenances differed by a factor of 2 to 4 in yield.These consistent differences between provenances represent the genetic differentiation of growth in European beech (genetic variability; cf.Hajek et al. 2016).

Differences in hydraulic safety and efficiency across provenances and sites
Across European beech populations, Stojnic et al.
In agreement, Weithmann et al. (2022a, b) likewise observed a range in P 50 from − 2.8 to − 3.4 MPa across 30 sites in Northern Germany.With an average P 50 of − 3.0 MPa and − 2.9 MPa for the German and Slovakian site, respectively, our results fall in this reported range.In European beech, a negative relationship between water availability and xylem safety has been observed, to either variable precipitation (Schuldt et al. 2016) or soil water availability (Weithmann et al.The average PI md of each trait (among provenances) with 95% confidence intervals and capital letters represent significant differences between groups based on Dunn's post hoc test (b).The Pearson correlation analysis between the original environment of provenances (MAT, mean annual temperature; MAP, mean annual precipitation; MSP, mean seasonal precipitation during April-June; EQ, Ellenberg quotient; FAI, Forest Aridity Index) and the measured traits (H inc , tree height increment; AGB inc , aboveground biomass increment; A S :A L , sapwood-to-leaf area ratio; C:N, leaf carbon-to-nitrogen ratio; δ 15 N, leaf nitrogen isotope ratio; δ. 13 C, leaf carbon isotope ratio; VD, vessel density; D, vessel diameter; A L :A X , lumen-to-sapwood area ratio; P 50 , water potential of 50% loss of conductance; P 88 , water potential of 88% loss of conductance; K s , specific conductivity) and only the correlations with a numeric value within the heat map were significant at p < 0.05 (c) 2022a, b).Here, we found a significant site effect in agreement with Wortemann et al. (2011).However, mean P 50 across provenances differed by only 0.14 MPa between the German and Slovakian site, which we attribute to a fairly comparable precipitation regime throughout the growing season at both sites.Across provenances, however, no significant differences in P 50 were found, confirming the limited degree of genetic differentiation in P 50 across populations (Wortemann et al. 2011;Hajek et al. 2016).In combination with field studies along environmental gradients (Schuldt et al. 2016;Stojnic et al. 2018;Weithmann et al. 2022a), our results confirm the high acclimation capacity of xylem vulnerability to cavitation in beech to the prevailing hydroclimatic or soil moisture conditions at the place of growth.
In contrast to these two traits, we observed a high degree of variability in hydraulic efficiency between provenances (inter-provenance variability) and sites (phenotypic plasticity).Specific conductivity (K s ) was on average 30% lower at the Slovakian site compared to the German site and differed significantly between provenances.It is well described that K s is a highly plastic variable, which differs strongly within (Lübbe et al. 2022) and across (Weithmann et al. 2022a) European beech individuals.We collected terminal branches of comparable diameter and modelled the distance to the tip (Kurjak et al. 2024), which is why we do not attribute our findings to a tree height effect (e.g.Lechthaler et al. 2019).Instead, differences in VD between provenances and sites seem mainly responsible for the high variation in hydraulic efficiency.Across sites, VD was by 30% lower at the German site compared to the Slovakian site, although tree height at the time of sampling was comparable (10.1 m versus 9.6 m at the German and Slovakian site, respectively).
Notably, there was no evidence for differences in distance-to-tip between samples from different sites or provenances, highlighting that the observed patterns are likely to reflect anatomical adjustments rather than artefacts caused by differences in the sampling Fig. 5 Pearson correlation matrix with linear trends for all evaluated traits.*p < 0.05, significant correlations.Given are tree height increment (H inc ), aboveground biomass increment (AGB inc ), sapwood-to-leaf area ratio (A S :A L ), leaf carbon isotope ratio (δ 13 C), leaf nitrogen isotope ratio (δ. 15 N), leaf carbon-to-nitrogen ratio (C:N), water potential of 50% loss of conductance (P 50 ), water potential of 88% loss of conductance (P 88 ), branch lumen-to sapwood-area ratio (A L :A X ), branch vessel diameter (D), branch vessel density (VD) and specific conductivity (K s ) protocol (Kurjak et al. 2024).The air temperature and precipitation were similar for the two sites during the sampling years (Fig. 1e, f ), but the multi-aged branch anatomy could have been affected by different climatic conditions.

Phenotypic plasticity and relatedness to the climate at the place of origin
Our findings are in line with various studies that report a high degree of phenotypic plasticity in European beech, which, among other traits, is reflected in stomatal morphology (Petrik et al. 2022), leaf phenology (Kramer et al. 2017), root architecture (Železnik et al. 2019), photochemistry (Pšidová et al. 2018), intrinsic water use efficiency (Dziedek et al. 2017) and seed germination and establishment success (Muffler et al. 2021).The overall high phenotypic plasticity among European beech populations indicates a considerable potential for acclimation or adaptation to the negative effects of climate change, at least to some extent (Leuschner 2020).Consequently, selection of proper seed material can significantly increase both juvenile and long-term survival rates (Andivia et al. 2021).Thereby, selection of provenances with higher iWUE and more negative P 50 might significantly improve their drought stress survival rates (Stojnic et al. 2018;Mantova et al. 2023;Blackman et al. 2023).
Here, we used the phenotypic plasticity index (PI md ) according to Valladares et al. (2006) in order to quantify the degree of intra-population variability between traits.The three safety-related traits (P 50 , P 88 and δ 13 C) showed overall lowest PI md among traits, confirming strong genetic control as concluded above.On the other hand, the two efficiency-related traits (K s and VD) as well as AGB inc were the most plastic traits.However, the growth-related traits showed a high degree of variability among the provenances, and especially, the SK and Bulgarian (BG) provenances showed high growth phenotypic plasticity.Correlation analysis revealed that provenances from more humid sites (higher MAP/MSP, lower EQ/FAI) showed higher phenotypic plasticity of the three safety-related traits (P 50 , P 88 and δ 13 C) and the lumen-to-sapwood area ratio (A L :A X ).Several recent studies have shown a close relationship between this wood anatomical trait and P 50 , which will be discussed below.Within a given species like beech, a higher relative lumen area per cross-sectional xylem area is associated with a lower embolism resistance (Lübbe et al. 2022;Weithmann et al. 2022b;Avila et al. 2023;Waite et al. 2023).Interestingly, we observed that provenances from a warmer climate (MAT) showed a lower phenotypic plasticity of A L :A X , which might be interpreted as a genetically determined drought-tolerance adaption.In regions with more arid conditions or increased competition at the edges of species distribution, there is likely an elevated selection pressure compared to other areas within the species' range (Michalski et al. 2017).Consequently, populations that evolved under more intense selection may prioritize strong genetic control for safety over extensive phenotypic plasticity within the population (Callahan et al. 2008).This emphasis on genetic control could result in trait canalization, potentially leading to reduced overall phenotypic adaptability (Debat et al. 2001;Klingenberg et al. 2019).

Interrelationships between growth-related, wood and foliar traits
We expected to find a close dependency of growth performance on hydraulic efficiency as previously reported at the intra-specific level (cf.Hajek et al. 2014;Ramesha et al. 2022), which was not confirmed.In fact, H inc and AGB inc were unrelated to all other wood anatomical, hydraulic and foliar traits.The lack of a clear relationship between growth and P 50 or iWUE suggests that using more productive provenances would not trade-off with xylem safety in their new environment.We therefore consider the lack of a relationship between growth and P 50 or iWUE as a major finding for assisted migration strategies of European beech.The measurements of P 50 included on average two to three years of growth, and for leaf δ 13 C we analysed one single year only.On the other hand, the increment data captured 19 or 22 years of growth, which might be one potential explanation for the absence of any correlation.However, we observed a close relation between xylem embolism resistance (P 50 ) and both VD and the lumento-sapwood area ratio (A X :A L ) in agreement with recent studies (cf., Lübbe et al. 2022;Weithmann et al. 2022b;Avila et al. 2023;Waite et al. 2023).At the intra-specific level, not the average diameter of vessels matters but the total vessel wall area, which is mirrored by VD and A X :A L and should be related to the total number of inter-vessel pits.While pit membrane thickness (T pm ) is directly related to P 50 (Isasa et al. 2023), increasing the number of pits might trade-off with xylem safety as the probability of encountering large pores in pore constriction sizes will increase, at least within a certain range of T pm (Kaack et al. 2021).
We further found a negative correlation between δ 13 C and both D and K s and a positive correlation between VD and δ 13 C.This indicates that trees with smaller vessel diameter, greater vessel density and lower specific conductivity have a higher foliar iWUE.Hence, our results suggest that provenances with higher iWUE have lower hydraulic requirements to maintain leaf gas exchange, or the lower K s leads to greater iWUE by constraining water supply in leaves.The negative correlation between K s and δ 13 C/iWUE has been observed for numerous tree species (Fichot et al. 2009;Andrade et al. 2022;Wedegaertner et al. 2022;Liu et al. 2023) although results are mixed as others report either a positive (Jin et al. 2016;Corcuera et al. 2012) or no relationship (Sellin et al. 2013(Sellin et al. , 2014)).Thus, the link between the K s and iWUE is inconclusive and more extensive analyses are needed.
We did not observe a significant correlation between iWUE and P 50 .In contrast, Alvarez-Maldini et al. (2022) found that lower P 50 among almond cultivars corresponded to higher iWUE, suggesting coordination of hydraulic safety and water utilization strategy.Likewise, Yao et al. (2020) observed a close correlation between P 50 and iWUE in Caragana species under water-deficit treatment, but no significant correlation for the well-watered control treatment.The lack of correlation in our study might therefore be attributed due to humid conditions at both sites.

Implications for assisted migration
Based on the results of this study, we conclude that the SK provenance showed overall best growth at both the German site and Slovakian site.Moreover, the SK provenance showed above-average δ 13 C values, while P 50 was comparable among provenances.Therefore, it could be seen as a seed source for highly productive forests without a negative trade-off between drought resistance and growth.The SL provenance, on the other hand, showed lowest yield, VD and lumen-tosapwood area ratio (A X :A L ) as well as the most negative P 88 value at both sites.Furthermore, this provenance developed the smallest total leaf area per cross-sectional xylem area, i.e. the sapwood-to-leaf area ratio (A S :A L ).During severe drought, the smaller surface area might result in a longer desiccation time (cf.Blackman et al. 2019;Petek-Petrik et al. 2023), which, in the long run, might be more favourable due to the anticipated increase in severe global change-type drought events (Hari et al. 2020).The SL provenance also showed the highest iWUE (δ 13 C) at the Slovakian site and above-average iWUE at the German site.Based on these traits, the SL provenance can be categorised as more drought resistant but at the cost of growth performance.
The ES and BG provenances originating from the driest environments (based on FAI) did not show remarkably greater drought resistance based on iWUE and P 50 than provenances from more humid environments, such as the CZ provenance or the SL provenance.Nevertheless, other important parameters that we did not investigate, such as rooting depth, minimal leaf conductance and capacitance (cf.Choat et al. 2018), might also be critical for the characterisation of drought resistance of these provenances.

Conclusion
We observed significant site differences for all traits covered after accounting for provenance effects, suggesting a high degree of phenotypic plasticity in European beech.However, as the sites differed in both soil N availability and winter temperature conditions, we cannot conclude which environmental factor had the prevailing effect on the acclimation response.While δ 13 C as a proxy for intrinsic water use efficiency of provenances was associated with hydraulic efficiency, hydraulic efficiency itself was unrelated to xylem safety.Instead, the lumen-to-sapwood area ratio revealed a strong negative relationship with P 50 .Overall, hydraulic efficiency-related traits had the highest and safety-related traits the lowest plasticity according the phenotypic plasticity index analysis.Tree growth showed no significant correlation with any of the traits measured, confirming no trade-off between growth and xylem safety in European beech.The lack of tradeoff suggests that it might be possible to select highly resistance provenances without negatively affecting their growth potential.On the other hand, the provenance with the lowest growth performance developed branches that supported less total leaf area and a xylem with lower total lumen area, which might be considered as drought adaptation.Overall, the observed differences highlight the potential for assisted migration efforts, which should ideally be supported by drydown experiments.The letters represent grouping according to Tukey's HSD post hoc tests.H inc is the tree height increment, AGB inc is the aboveground biomass increment, A S :A L is the sapwood-to-leaf area ratio, δ 13 C is the leaf carbon isotope ratio, δ 15 N is the leaf nitrogen isotope ratio and C:N is the leaf carbon-to-nitrogen ratio The letters represent grouping according to Tukey's HSD post hoc tests.P 50 is the water potential of 50% loss of conductance, P 88 is the water potential of 88% loss of conductance, A L :A X is the lumen-to-sapwood area ratio, D is the specific vessel diameter, VD is the vessel density and K s is the hydraulic conductance normalised by max cross-sectional xylem area

Fig. 1
Fig. 1 Map of the locations at origin of the analysed populations (black dots) as well as the location of the experimental common garden sites in Germany (red colour) and Slovakia (blue colour) (a), and soil N content (b), soil organic C content (c) and soil pH (d) for both common garden sites.Further given are the monthly mean air temperature (e) and monthly precipitation sums (f) during the sampling years (DE, 2014; SK, 2017) for both sites; the sampling period has been highlighted with light green stripes.Significance levels: ***p < 0.001; **p < 0.01

Fig. 3
Fig.3Trait distribution between provenances and common garden sites for xylem hydraulic properties and xylem anatomical traits.Shown are the water potential at 50% loss of conductance (a, P 50 ), water potential at 88% loss of conductance (b, P 88 ), lumen-to-sapwood area ratio (c, A L :A X ), vessel diameter (d, D), vessel density (e, VD) and specific conductivity (f, K s ).Frequency distributions are supplemented with the provenance average (dots) and 95% confidence intervals.The provenances are sorted from the wettest origin (CZ) to driest origin (ES) based on Forest Aridity Index.Results of post hoc tests are given in Table5in Appendix

Fig. 4
Fig.4The phenotypic plasticity indices of each trait and provenance (a), where PI md can range between 0 (low plasticity) and 1 (high plasticity).The average PI md of each trait (among provenances) with 95% confidence intervals and capital letters represent significant differences between groups based on Dunn's post hoc test (b).The Pearson correlation analysis between the original environment of provenances (MAT, mean annual temperature; MAP, mean annual precipitation; MSP, mean seasonal precipitation during April-June; EQ, Ellenberg quotient; FAI, Forest Aridity Index) and the measured traits (H inc , tree height increment; AGB inc , aboveground biomass increment; A S :A L , sapwood-to-leaf area ratio; C:N, leaf carbon-to-nitrogen ratio; δ 15 N, leaf nitrogen isotope ratio; δ. 13 C, leaf carbon isotope ratio; VD, vessel density; D, vessel diameter; A L :A X , lumen-to-sapwood area ratio; P 50 , water potential of 50% loss of conductance; P 88 , water potential of 88% loss of conductance; K s , specific conductivity) and only the correlations with a numeric value within the heat map were significant at p < 0.05 (c)

Fig. 6 Fig. 7
Fig. 6 The provenance average percentage loss of conductance (PLC) curves derived by Cavitron method for German common garden site (a) and Slovakian common garden site (b)

Table 1
List of variables included, with units and definitions

Table 2
(Fick and Hijmans 2017)climatic characteristics of the place of origin for all tested provenances and common garden sites extracted from WorldClim database(Fick and Hijmans 2017)for the 1950-2000 period for provenances and 2000-2017 period for sites MAT mean annual temperature, MMT mean minimal temperature during January, MAP mean annual precipitation, MSP mean early growing season precipitation from April to June, EQ Ellenberg's quotient, FAI Forest Aridity Index

Table 3
Results of three-way ANOVA for growth-related, wood anatomical, hydraulic and foliar traits between provenances (PV), across common garden sites (Site), their interactions (PV × Site) and blocks

Table 4
Provenance-level averages (± 95% confidence interval) of growth characteristics properties and leaf carbon and nitrogen content for both common garden sites

Table 5
Provenance-level averages (± 95% CI) of xylem hydraulic and wood anatomy traits for both common garden sites